Samsung HT-BD6200R/EDC, HT-BD6200R/XEE manual Case 2 Connecting to a Wireless IP sharer

Case 2 : Connecting to a Wireless IP sharer

You can connect to network with a Wireless IP sharer. See page 49 for Wireless Network Setup.

ENG

Modem Port

Wireless IP sharer

Wireless LAN

Modem CableAdapter

(not supplied)

M This unit is compatible with only Samsung Wireless LAN Adapter. (not supplied) (Model name: WIS09ABGN).

-The Samsung Wireless LAN Adapter is sold separately.

-Contact a Samsung Electronics agent or service centre for purchasing.

You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the wireless network.)

Wireless LAN, in its nature, may cause interference, depending on the use condition (AP performance, distance, obstacle, interference by other radio devices, etc).

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

When applying the security key for the AP (wireless IP sharer), only the following is supported.

1) Authentication Mode : WEP, WPAPSK, WPA2PSK

2) Encryption Type : WEP, TKIP, AES

Connect the Wireless LAN Adapter to only the Wireless LAN Jack on the back of the main unit.

● CONNECTIONS

29