Setup

WPS(PBC)

The easiest way to set up the wireless network connection is using the WPS(PBC) function or the One Foot Connection function.

If your wireless router has a WPS(PBC) button, follow these steps:

1.Press the ▲▼ buttons to select WPS(PBC).

Settings

Network Settings

Display

Select a network connection type.

2.Press the ENTER button.

3.Place the Samsung Wireless Router within 25 cm (10 inches) of your product to connect.

4.Wait until the connection is automatically established.

Network Status

Check whether a connection to the network and the Internet have been established.

Audio

Network

System

Wired

Wireless

Language (general)

Connect to the Wireless Router easily by pressing the

Security WPS(PBC) WPS(PBC) button. Choose this if your Wireless Router

Generalsupports Push Button Configuration(PBC).

One Foot

Support Connection

> Move " Enter ' Return

2.Press the ENTER button.

3.Press the WPS(PBC) button on your router within two minutes. Your product displays the Network Selection Screen, and automatically acquires all the network settings values it needs and connects to your network. When it is done, it displays an OK button. Press the ENTER button on your remote.

One Foot Connection

You can set up the wireless connection automatically if you have a Samsung Wireless Router which supports One Foot Connection. To connect using the One Foot Connection function, follow these steps:

1.Press the ▲▼ buttons to select One Foot Connection.

Settings

Network Settings

Display

Select a network connection type.

Audio

Settings

 

 

Network Status

 

 

 

 

 

Display

 

 

MAC Address

XX:XX:XX:XX:XX:XX

 

 

 

Audio

 

 

IP Address

0.0.0.0

Network

KT_WLAN

 

Subnet Mask

0.0.0.0

 

Gateway

0.0.0.0

 

System

 

 

DNS Server

0.0.0.0

Cannot connect to the Wireless Router. Try the following. Language

- Ensure the Wireless Router is powered on and try re-setting the power of the SecurityWireless Router.

- Check the security key if the Wireless Router has a security key.

General

SupportNetwork Settings

IP Settings

Retry

OK

< Move " Enter ' Return

BD-LIVE Internet Connection

Set to allow or prohibit an Internet connection when you use the BD-LIVE service.

Allow (All) : The Internet connection is allowed for all BD-LIVE contents.

Allow (Valid Only) : The Internet connection is allowed only for BD-LIVE contents containing a valid certificate.

Prohibit : No Internet connection is allowed for any BD-LIVE content.

NOTE

What is a valid certificate?

When the product uses BD-LIVE to send the

disc data and a request to the server to certify

the disc, the server uses the transmitted data

to check if the disc is valid and sends the

certificate back to the product.

Network

Wired

System

Wireless

Language (general)

Security WPS(PBC)

General One Foot

Support Connection

42 English

Connect to your wireless network automatically if your Wireless Router supports One Foot Connection. Select this connection type after placing the Wireless Router within 10 inches(25cm) of product.

>Move " Enter ' Return

The Internet connection may be restricted

while you are using BD-LIVE contents.

HT-D6730W_XAA_0208.indd 42

2011-02-09 ¿ÀÀü 3:16:18

Page 42
Image 42
Samsung HT-D6730W Network Status, BD-LIVE Internet Connection, One Foot Connection, Certificate back to the product