Samsung HT-D6750WK/SQ manual Hdmi Auto Detection Function, Connecting the fm antenna, English 

HDMI IN : Connecting to an External Component with an HDMI Cable

1.Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device.

2.Press the FUNCTION button to select H. IN1 or H. IN2 input.

The mode switches as follows : BD/DVD ; D. IN ; AUX ; R. IPOD ; W. IPOD ; H. IN1 ; H. IN2 ; FM

HDMI Auto Detection Function

If you have connected your home theatre by HDMI cable, the home theatre's video output automatically switches to the HDMI mode when you turn it on. For available HDMI video resolutions, see page 32.

•This function is not available if the HDMI cable does not support CEC.

•HDMI connection description

-HDMI outputs only a pure digital signal to the TV.

-If your TV does not support HDCP, random noise appears on the screen.

•What is the HDCP?

HDCP (High-band width Digital Content Protection) is a system for preventing BD/DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.

!CAUTION

The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of the product.

Connecting the fm antenna

02 Connections

FM Antenna (supplied)

FM ANT

1.Connect the FM antenna supplied to the FM ANTENNA Jack.

2.Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or other rigid surface.

✎NOTE

This product does not receive AM broadcasts.

WIRELESS

English