Samsung HT-D6750WK/SQ manual Network Status, BD-LIVE Internet Connection, One Foot Connection

WPS(PBC)

The easiest way to set up the wireless network connection is using the WPS(PBC) function or the One Foot Connection function.

If your wireless router has a WPS(PBC) button, follow these steps:

1.Press the ▲▼ buttons to select WPS(PBC).

Display		Network Settings
Audio Select a network connection type.
Network	Wired
System	Wireless
Language(general)		Connect to the Wireless Router easily by pressing the
Security	WPS(PBC)
		WPS(PBC) button. Choose this if your Wireless Router
General		supports Push Button Configuration(PBC).
	One Foot
Support	Connection
		>Move "Enter 'Return

2.Press the ENTER button.

3.Press the WPS(PBC) button on your router within two minutes. Your product displays the Network Selection Screen, and automatically acquires all the network settings values it needs and connects to your network. When it is done, it displays an OK button. Press the ENTER button on your remote.

One Foot Connection

You can set up the wireless connection automatically if you have a Samsung Wireless Router which supports One Foot Connection. To connect using the One Foot Connection function, follow these steps:

1.Press the ▲▼ buttons to select One Foot Connection.

S		Network Settings
Display
Audio Select a network connection type.
Network	Wired
System
	Wireless
Language(general)		Connect to your wireless network automatically if your
Security	WPS(PBC)
		Wireless Router supports One Foot Connection. Select
General	One Foot	this connection type after placing the Wireless Router
		within 10 inches(25cm) of product.
Support	Connection	>Move "Enter 'Return

		03
2.	Press the ENTER button.	Setup
3.	Place the Samsung Wireless Router within
	25 cm (10 inches) of your product to
	connect.
4.	Wait until the connection is automatically
	established.

Network Status

Check whether a connection to the network and the Internet have been established.

Settings		Network Status
Display		MAC Address	XX:XX:XX:XX:XX:XX
Audio		IP Address	0.0.0.0
Network	KT_WLAN	Subnet Mask	0.0.0.0
		Gateway	0.0.0.0
System		DNS Server	0.0.0.0

LanguageCannot connect to the Wireless Router. Try the following.

- Ensure the Wireless Router is powered on and try re-setting the power of the SecurityWireless Router.

- Check the security key if the Wireless Router has a security key. General

SupportNetwork Settings IP Settings Retry OK

<Move "Enter 'Return

BD-LIVE Internet Connection

Set to allow or prohibit an Internet connection when you use the BD-LIVE service.

•Allow (All) : The Internet connection is allowed for all BD-LIVE contents.

•Allow (Valid Only) : The Internet connection is allowed only for BD-LIVE contents containing a valid certifi cate.

•Prohibit : No Internet connection is allowed for any BD-LIVE content.

✎NOTE

What is a valid certificate?

When the product uses BD-LIVE to send the disc data and a request to the server to certify the disc, the server uses the transmitted data to check if the disc is valid and sends the certifi cate back to the product.

The Internet connection may be restricted while you are using BD-LIVE contents.

English 1