Basic Functions
How to Link the Wireless transmitter
with the main unit
1.Turn off your Home Theater.
2.Press the 4, 7, 6, 3 buttons on the remote control in order.
•The Power LED blinks once.
3.Connect the iPod/iPhone to the Wireless transmitter.
LINK
STANDBY
CHARGE
4.Turn on the iPod/iPhone. Press the "ID SET" button on the back of the Wireless transmitter for 5 seconds. The link light on the wireless transmitter blinks rapidly.
5.Turn on your product.
•To listen to music from your iPod/iPhone over
the product, press the 
button to select "W. IPOD" mode.
•After you select "W. IPOD" mode, turn the volume of the product down to avoid hearing damage.
•You can control the speaker volume of the iPod/iPhone with a volume wheel or a volume bar.
•When the iPod/iPhone is stopped or in a power saving mode, the Wireless transmitter enters Sleep Mode. When iPod/iPhone is set to Deep Sleep Mode, the Wireless transmitter turns off.
Operation status of the wireless transmitter's LED
LINK
STANDBY
C
LINK
STANDBY
CHARGE
| Function | ||
Display |
|
| |
LINK | STANDBY | ||
| |||
| (Blue LED) | (Red LED) | |
|
|
| |
LED ON | Pairing successfully | STANDBY | |
completed | |||
|
| ||
LED BLINK | Processing iPod/ | LOW | |
(Long blink) | iPhone | BATTERY | |
|
|
| |
LED BLINK | Processing pairing | Pairing failed | |
(Short blink) | |||
|
| ||
|
|
| |
!CAUTION
If you use a wireless device such as a laptop computer, an AP, or Wifi , near the main home theater unit, an unstable operation error can occur.
Do not pair the
The maximum transmission distance from the product to the wireless transmitter is about 16.4 feet, but may vary depending on your operation environment.
The audio signal may be weakened or even lost where there is an obstacle such as a wall or partition between the product and wireless transmitter. You can also weaken or lose signal if you move the wireless transmitter around.
Connecting microphone
You can enjoy the feeling of a karaoke bar in the comfort of your home.
Watch the video and sing along the lyrics displayed on the TV screen against the accompaniment.
1. Connect the microphone to the MIC jack on the front panel.
2. Press the ECHO button to adjust the echo level of the microphone.
3.Press the MIC VOL button to adjust
the voice volume of the microphone.
✎NOTE
The microphone operates only in Home menu, BD playback and DVD playback modes.
The karaoke scoring displays the score automatically when the Karaoke Scoring is set to On and a microphone is connected. Disconnect the microphone if you do not want to display the score.
