Samsung HT-D6750WK/SQ manual Optical Connecting an External Digital Component, Set-Top Box

Connecting audio from external Components

02 Connections

dDIGITAL AUDIO IN

OPTICAL

HDMI OUT

FM ANT

HDMI IN

WIRELESS

COMPONENT OUT

AUX INVIDEO OUT

SU

Optical Cable		Red	White
(not supplied)
	Audio Cable
	(not supplied)
	If the external Analog
	component has only one
Set-Top Box	Audio Out, connect either	VCR
	left or right.
OPTICAL		AUX

OPTICAL : Connecting an External Digital Component

Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).

1.Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital component.

2.Press the FUNCTION button to select D.IN input.

•The mode switches as follows : BD/DVD ; D. IN ; AUX ; R. IPOD ; W. IPOD ; H. IN1 ; H. IN2 ; FM

✎NOTE

To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV.

This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.

This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream cannot be supported.

AUX : Connecting an External Analog Component

Analog signal components such as a VCR.

1.Connect AUX IN (Audio) on the product to the Audio Out of the external Analog component.

•Be sure to match connector colors.

2.Press the FUNCTION button to select AUX input.

•The mode switches as follows : BD/DVD ; D. IN ; AUX ; R. IPOD ; W. IPOD ; H. IN1 ; H. IN2 ; FM

✎NOTE

You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product.

English