Getting Started

Toroidal Ferrite Core

For the Power Cord

POWER

<Main Unit>

<SWA-6000>

If you attach a Toroidal ferrite core to the power cord, it will help to prevent RF interference from radio signals.

1.Pull the fixing tab of the Toroidal ferrite core to open it.

2.Make a loop twice in the power cord.

3.Attach the Toroidal ferrite core to the power cord as the figure shows and press it until it clicks.

For the Speaker Cable

FM ANT

OPTICAL

ASC IN

DIGITAL

AUDIO IN

SPEAKERS OUT

CENTER

FRONT L

FRONT TOP L

SUBWOOFER

FRONT R

FRONT TOP R

IMPEDANCE : 3￿

<Main Unit>

<SWA-6000>

Main Unit

1.Open the ferrite core by pulling up the tab.

2.Make a loop twice in the Speaker Cables.

3.Attach the ferrite core to the arranged cables and press to close it until you hear a click.

•Insert the ferrite core as close to the main unit as possible.

SWA-6000

Make 3 loops of the speaker cables that are connected to the REAR L and REAR R terminals of the wireless receiver (SWA-6000) and insert the ferrite core in the same way as step 3 above.

12 English