Connections

Installing the Speakers on the Tallboy Stand1.Straighten the speaker cable and put it into the hole on the

 

Stand Base.

1

2

Stand Base

2.

 

Turn the Stand Base upside-down and connect it to the

 

 

Stand.

 

 

 

 

 

 

Stand

3.

Use the driver to combine the screws on the 3 marked

3

4

 

 

holes.

 

4.

Connect the upper Speaker to the assembled Stand.

 

Speaker

 

 

 

 

 

 

 

Stand

5.

Insert a screw clockwise into the hole on the rear of the

5

6

 

6.

speaker using a screwdriver.

 

This is the appearance after the speaker is installed. Follow

 

 

or

 

these steps to install other speaker.

 

 

 

Connecting The Speakers

1.Match each speaker cable bundle to the correct speaker by matching the colour coded

plug on each bundle to the coloured sticker on the bottom of each speaker.2. To attach speaker wire to each speaker:

a.Press down the red tab on the back of the speaker, insert the red wire, and then

release the tab.Black

 

 

 

 

Red

b. Press down the black tab on the back of the speaker, insert the black wire, and then

 

 

 

 

release the tab.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Connect the speaker wire plugs from each speaker to the back of the product by

 

 

 

 

 

 

 

 

 

 

 

 

matching the colours of the speaker plugs to the colours of the speaker jacks.

 

 

 

 

 

 

4.Connect the left and right surround speakers to the wireless receiver module. Again, match the colour of the plugs to the jacks on the wireless receiver module.

5.Plug the power cord of the wireless receiver module into a wall outlet.

6.Turn on the product. The product and wireless receiver module will now communicate with each other and you will hear sound from the Surround speakers.

16 English