NOTES
You can get the Network values from your Internet provider.
7.When finished entering all the values, select OK, and then press the E button. The home cinema verifies the network connection and then connects to the network.
Wireless Network
You can setup a wireless network connection in three ways:
-Wireless Automatic
-Wireless Manual
-WPS(PBC)
Before you configure the wireless network connection, disconnect any wireless network device currently connected to the product or, if applicable, the product's current wired connection.
❑Wireless - Automatic
After following Steps 1 to 3 in "Configuring Your Network Connection" on page 26:
1.In the Network Settings screen, change Network type to Wireless. The product searches for and then displays a list of the available networks.
Network Settings
4.When finished, select Done, and then press the E button. The product verifies the network connection and then connects to the network.
NOTES
You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem.
❑Wireless - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
After following Steps 1 to 3 in "Configuring Your Network Connection" on page 26:
1. | In the Network Settings screen, change Network | |
| type to Wireless. The product searches for and | |
2. | then displays a list of the available networks. | |
Scroll through the list, select the desired network or | ||
3. | Add Network, and then press the E button. | |
If you selected a network in Step 2, go to Step 6. | ||
4. | If you selected Add Network, go to Step 4. | |
Enter your wireless network or wireless router's | ||
| name. | |
| • | Enter numbers directly using the number buttons |
| • | on your remote control. |
| Enter letters by selecting a letter with the ▲▼◄► | |
| • | buttons, and then pressing the E button. |
| To display capital letters (or redisplay small letters |
Settings 04
Select your network type.
Network type | Wireless |
Wireless network
KIMING_VTOWER
TIAS
You can connect your
if capital letters are displayed), select | , and |
then press the E button. |
|
• To display symbols and punctuation, select | |
123#&, and then press the E button. To | |
redisplay letters, select 123#&, and then press | |
the E button. |
|
When finished, select Done, and then press the E button.
Refresh WPS(PBC)
2.Select the desired network, and then press the E button.
3.On the Security screen, enter your network's security code or pass phrase.
Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with ▲▼◄► buttons, and then pressing E button.
5.On the Security type screen that appears, use the ▲▼ buttons to select the network's Security type, and then press the E button. On the next screen, enter your network's security code or pass phrase.
•Enter numbers directly using the number buttons on your remote control.
•Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button.
When finished, select Done, and then press the E button. The product searches for the network.