Support
Software Upgrade
For more information about this function see page 18.
Contact Samsung
Provides contact information for assistance with your product.
Terms of Service Agreement
View the general disclaimer regarding third party contents and services.
Reset
Reverts all settings to their defaults except for the network. Requires that you enter your security PIN. The default security PIN is 0000.
Network Setup
When you connect this product to a network, you can use network based applications and functions such as
Configuring Your Network Connection
If you skipped network setup during the Initial Setup, follow the instructions below to configure the home cinema's network connection.
Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, we recommend you use the automatic procedure below. If it is static, you must use the manual procedure that follows.
•Before you begin, confirm that the product is connected to your router with a network cable.
ĞĞAutomatic
To start the configuration process, follow these steps:
1.In the Home menu, select Settings, and then press the v button.
2.Select Network, and then press the v button.
3.Select Wired Network Settings, and then press the v button.
The Wired Network Settings screen appears.
4.Press the + button on the Internet Protocol Setup menu.
Use $% button to select Auto, and then press the v button.
Settings |
|
|
|
|
| |
Pic | Wired Network Settings |
|
| |||
|
|
|
|
|
| |
So | Internet Protocol Setup | : Auto |
|
| ||
NetworkIP Address | : | 0 | 0 | 0 | 0 | |
SystemSubnet Mask | : | 0 | 0 | 0 | 0 | |
| Gateway | : | 0 | 0 | 0 | 0 |
Language |
| |||||
SecurityDNS | : Auto |
|
| |||
| DNS Server | : | 0 | 0 | 0 | 0 |
General |
| |||||
Support | > Move |
| " Select |
| ' Return | |
|
|
|
| |||
5.The Network function acquires and fills in the values for IP Address, Subnet Mask, etc., automatically.
6.After the Network function has acquired the network values, press the RETURN button.
7.Select Network Test, and then press v. The home cinema validates the network connection. When it is done, press the RETURN button.
Manual
If you have a static IP address or the Automatic procedure does not work, you’ll need to set the Network Settings values manually. You can get the Network Settings from your Internet Service Provider (ISP).
Settings |
|
|
|
|
|
|
Picplay | Wired Network Settings |
|
| |||
|
|
|
|
|
| |
SoundioInternet Protocol Setup | : Manual |
|
| |||
NetworkIP Address |
| : | 0 | 0 | 0 | 0 |
SystemSubnet Mask | : 255 | 255 | 255 | 0 | ||
Gateway |
| : | 0 | 0 | 0 | 0 |
Language |
|
| ||||
SecurityDNS |
| : Manual |
|
| ||
DNS Server |
| : | 0 | 0 | 0 | 0 |
General |
|
| ||||
Support |
| > Move | " Select | ' Return | ||
|
| |||||
1.Follow the first four steps in the Automatic procedure, but select Manual instead of Auto in Step 4.
