Samsung HTF4500ZA Listening to Radio, Using Buttons on the Remote Control, Setting Mono/Stereo

Media Play

Listening to Radio

Using Buttons on the Remote Control

1.Press the FUNCTION button to select FM.

2.Tune in to the desired station.

•Preset Tuning 1 : Press the 5 button to select PRESET and then press the TUNING UP, DOWN button to select the preset station.

-Before you can tune to preset stations, you must add preset stations to the product's memory. See Presetting Stations below.

•Manual Tuning : Press the 5 button to select MANUAL and then press the TUNING UP, DOWN button to tune in to a lower or higher frequency.

•Automatic Tuning : Press the 5 button to select MANUAL and then press and hold the TUNING UP, DOWN button to automatically search the band.

Setting Mono/Stereo

Press the MO/ST button.

•Each time you press the button, the sound switches between STEREO and MONO.

•In a poor reception area, select MONO for a clear, interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 into memory.

1.Press the FUNCTION button to select FM.

2.Press the TUNING UP, DOWN button to select <89.10>.

3.Press the TUNER MEMORY button.

•NUMBER flashes on the display.

4.Press the TUNER MEMORY button again.

•Press the TUNER MEMORY button before NUMBER disappears from the display on its own.

•After you press the TUNER MEMORY button, NUMBER disappears from the display and the station is stored in memory.

5.To preset another station, repeat steps 2 to 4.

•To tune in to a preset station, press the TUNING UP, DOWN button.

Using the TV SOUND Button on

the Remote Control

If you have a TV that supports Anynet+ (HDMI-CEC), the TV SOUND button lets you direct the TV's audio to the Home Theater Speakers or the TV Speakers. To use, follow these steps:

1.Connect an HDMI cable to the TV and home theater. (See page 14.)

2.Set Anynet+ (HDMI-CEC) On in the home theater and TV.

3.Press the TV SOUND button on the remote control. TV SOUND ON flashes on the display on the front panel, and then changes to D. IN.

•When TV SOUND is on, TV audio outputs through the Home Theater speakers.

4.Press the TV SOUND button again to turn TV SOUND off.

•When TV SOUND is off, TV audio outputs through the speakers of the connected Anynet+ TV.

❑Use TV SOUND:

1)When you want to listen to the TV's audio through the home theater speakers.

2)When you want to listen to the audio from a USB device plugged into the TV through the home theater speakers.

❑TV SOUND ON/OFF support specification

Connected TV	Anynet+	TV	TV
	(HDMI-CEC)	Sound	Sound
	Setting	ON	OFF
Anynet+	ON	O	O
(HDMI-CEC)
	OFF	O	X
supported TV
Anynet+	No operation	O	X
(HDMI-CEC) not
supported TV

26 English