CONNECTIONS
CONNECTING WITH A HUB (NOT INCLUDED)
Power
connection
DC 24V
5A.0 5V
Wireless Router 
LAN 
cable
HUB
Power connection
1Connect a LAN cable to the router and the ETHERNET SWITCH on the back of the HUB.
•If the product is already connected to the router by wire, disconnect the LAN cable from the product and then connect the cable between the hub and router.
•You can connect the LAN cable to any ETHERNET SWITCH port on the HUB.
2Attach the HUB's power cord to the power port on the rear of the HUB, and then plug the power cord into an electrical outlet.
3 | The power ( |
| ) and the HUB ( | ) indicators on the HUB's front turn on. |
| ||||
| ||||
| When the pairing indicator ( | ) begins to flash, plug the product(s) into an | ||
outlet.
If the HUB's pairing indicator does not flash, press the SPK ADD button on the rear of the HUB.
•If you are adding multiple products, connect all the product's to electrical outlets. If you are not connecting all the products, refer to pages 13~14.
15
