Updating the Channel List Automatically, Location

Updating the Channel List Automatically
You can update the channel list when the broadcaster			Auto Store
adds new Services or if you move the TV to a new		Choose system to scan
location.		Auto		
1.	Press the D.MENU button to display the DTV menu.	Cable		
1.	Press the D.MENU button to display the DTV menu.	Aerial		
2.	Press the ▲ or ▼ button to select "Channel", then press
	the ENTER/OK button.	Move	Enter	Return
3.	Press the ENTER/OK button again, to select "Auto Store".	Move	Enter	Return
3.	Press the ENTER/OK button again, to select "Auto Store".	Move	Enter	Return
4.	Press the ▲ or ▼ button to select "Auto", "Cable" or "Aerial".	Move	Enter	Return
4.		Mode	: Custom	
	Press the ENTER/OK button.	Equalizer	Auto Store	
	• Auto: Scans channels automatically.	Auto Volume	: Off	
	• Cable: Scans cable channels.	SRS TS XT	: Off	
	• Cable: Scans cable channels.	Internal Mute	: Off	
		Scanning for cable digital services...
	• Aerial: Scans aerial channels.	Reset		35%
	This product cannot scan both cable and aerial	Services found: 24 Frequency: 114000 KHz
	channels at the same time.		Stop
5.	When it has finished, the number of scanned services will		Stop
5.	When it has finished, the number of scanned services will
	be displayed.	Return
	The existing favourite channel list will not be deleted when
	the channel list is updated.
	To stop the scan before it has finished, press the ENTER/OK button with "STOP" selected.

6.Press the EXIT button to exit.

If the signal status is poor, the "No Service found! Check the aerial connection" message is displayed.

Updating the Channel List Manually

You can specify the channel for a fast channel search.

1.Press the D.MENU button to display the DTV menu.

2.Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.

3.Press the ▲ or ▼ button to select "Manual Store", then press the ENTER/OK button.

4.Press the ▲ or ▼ button to select "Cable", then press the ENTER/OK button.

• Frequency: Displays the frequency for the channel. (Differs in each country)

•Modulation: Displays available modulation values.

•Symbol rate: Displays available symbol rates.

5.Press the ▲ or ▼ button to select "Aerial", then press the ENTER/OK button.

• Channel: Channel "21" to "69" in sequence are displayed (depending on the country)

•Frequency: The frequency available in the Channel group is displayed.

•Bandwidth: The available bandwidths are 8 MHz.

6.When it has finished, the number of scanned services will be displayed.

7.Press the EXIT button to exit.

English - 33