Storing Channels Manually
You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1Press the MENU
button.
Result: The main menu is displayed.
2Press the 
or 
button to select Channel.
Result: The options available in the Channel group are displayed.
3Press the ENTER
button.
4Press the 
or 
button to select Manual Store. Press the ENTER
button.
Result: The options available in the Manual Store menu are displayed with Programme selected.
5Press the ENTER
button again.
To assign a programme number to a channel, find the correct number by pressing the 
or 
button and then press the ENTER
button.
You can also set a programme number by pressing number buttons on the remote control.
6Press the 
or 
button to select Colour System and then press the ENTER
button.
Select the colour standard required by pressing the 
or 
button repeatedly and then press the ENTER
button.
Result: The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NTSC 4.43
7Press the 
or 
button to select Sound System and then press the ENTER
button.
Select the sound standard required by pressing the 
or 
button repeatedly and then press the ENTER
button.
Result: The sound standards are displayed in the following order:
BG - DK - I - L
8For all the channels to move to the required channel numbers, repeat steps 5 to 7 after selecting Programme by pressing the 
or 
button.
