Setting the Sound, Changing the Sound Standard

SETTING THE SOUND

You can select the type of the special sound effect to be used when


1.	Press the MENU button to display the menu. Press the				or button to
	select “Sound”, then press the ENTER			button.
2.	Press the ENTER	button again, to select “Mode”.
3.	Select the required sound effect by pressing the or				button repeatedly
	and then press the ENTER		button.

	You can also select these		Standard: Selects the normal sound mode.
			Music: Emphasizes music over voices.
	options by simply pressing the
			Movie: Provides live and full sound for movies.
	S.MODE button on the remote
			Speech: Emphasizes voices over other sounds.
	control.
			Custom: Selects your custom sound settings.

			(Refer to “Adjusting the Sound Settings” on page 12)

The sound settings can be adjusted to suit your personal preferences.

1. Press the MENU button to display the menu. Press the or button to select “Sound”, then press the ENTER button.

2.	Press the	or	button to select “Equalizer”, then press the
	ENTER	button.

3.	Press the	or	button to select a particular item.
	Press the ENTER		button.
4.	Press the	or	button to reach the required setting.
	Press the ENTER		button.

5.Press the EXIT button to exit.

If you make any changes to these settings, the Sound Mode is automatically

switched to “Custom”.

Each broadcasting station has its own signal conditions, and so it is not

easy for you to adjust the volume every time the channel is changed.

This feature let you automatically adjust the volume of the desired

channel by lowering the sound output when the modulation signal is

high or by raising the sound output when the modulation signal is low.


1.	Press the MENU button to display the menu. Press the or				button to
	select “Sound”, then press the ENTER			button.
2.	Press the	or	button to select “Auto Volume”, then press the
	ENTER	button.
3.	Press the	or	button to select “On” or “Off”. Press the ENTER		button.
4.	Press the EXIT button to exit.

English-12