38
English
Advanced Features
Listening through a Receiver ¦

You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker.

1. Select Receiver and set to On.

2. Press the EXIT button to exit.

If your receiver supports audio o nly, it may not appear in the device list.

✎

The receiver will work when you have pr operly connected the optica l in jack of the receiver to the

✎

DIGITAL AUDIO

OUT (OPTICAL) jack of the TV.

When the receiver (i.e Home Theatre) is set to O n, you can hear sound output from th e TV’s Optical jack. When the

✎

TV is displaying a DTV (aerial) s ignal, the TV will send out 5.1 channel sou nd to the receiver. When the source is a

digital component such as a DVD and i s connected to the TV via HDMI, onl y 2 channel sound will be hea rd from

the receiver.

NOTE
✎

You can only control Anynet

x
+ devices using the TV remote contro l, not the buttons on the TV.

The TV remote control may not work under c ertain conditions. If thi s occurs, reselect the Anynet

x
+ device.

The Anynet

x
+ functions do not operate with other man ufacturers’ products.
Troubleshooting for Anynet ¦+
Problem Possible Solution
Anynet+ does not work. Check if the device is an Anynet• + device. The Anynet+ system supports Anynet+ devices only.
Connect only one receiver (home theatre).•
Check if the Anynet• + device power cord is properly connected.
Check the Anynet• + device’s Video/Audio/HDMI Cable connections.
Check whether Anynet• + (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.•
Check whether it is Anynet• + exclusive remote control.
Anynet• + does not work in certain situations. (Searching channels, operating Media Play or Plug & Play (Initial
setup), etc.)
When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off •
and on again.
Check if the Anynet• + Function of Anynet+ device is set on.
I want to start Anynet+.Check if the Anynet• + device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On
in the Anynet+ Setup menu.
Press the • TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.Select • View TV in the Anynet+ menu.
Press the • SOURCE button on the TV remote control and select a device other than Anynet+ devices.
Press • P
>
/
<
, PRE-CH, and FAV.CH to change the TV mode. (Note that the channel button operates only
when a tuner-embedded Anynet+ device is not connected.)
The message “Connecting to
Anynet+ device...” appears on the
screen.
You cannot use the remote control when you are configuring Anynet• + or switching to a view mode.
Use the remote control when the Anynet• + setting or switching to view mode is complete.
The Anynet+ device does not play. You cannot use the play function when • Plug & Play (Initial setup) is in progress.
The connected device is not
displayed.
Check whether or not the device supports Anynet• + functions.
Check whether or not the HDMI Cable is properly connected.•
Check whether • Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet• + devices again.
You can connect an Anynet• + device using the HDMI Cable only. Some HDMI cables may not support Anynet+
functions.
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power •
failure, please repeat the device scan.
The TV programme cannot be
recorded.
Check whether the antenna jack on the recording device is properly connected.•
The TV sound is not output
through the receiver.
Connect the optical cable between TV and the receiver.•
BN68-02689A_Eng.indb 38 2010-03-07 �� 5:37:34