Samsung LE46C630, LE40C630 Auto Adjustment t, Screen, Equalizer, SRS TruSurround HD Off / On t

Basic Features

¦¦ Setting up the TV with Your PC ¦¦ Adjusting sound settings

Set the input source to PC.

Auto Adjustment t

Adjust frequency values/positions and fine tune the settings automatically.

✎✎Not available when connecting through HDMI/DVI cable.

Screen

■■ Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine- tune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen.

■■ Position: Adjust the PC screen position with direction button (▲ / ▼ / ◄ / ►).

■■ Image Reset: Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Equalizer

Adjusts the sound mode.

■■ Balance L/R: Adjusts the balance between the right and left speaker.

■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.

■■ Reset: Resets the equalizer to its default settings.

¦¦ Sound Systems, Etc.

SRS TruSurround HD (Off / On) t

(standard sound mode only)

This function provides a virtual 5.1 channel surround sound experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology.

Setting Up Your PC Software (Based on Windows XP)			SRS TruDialog (Off / On)
Depending on the version of Windows and the video card,
			(standard sound mode only)
the actual screens on your PC may differ in which case the
			This function allows you to increase the intensity of a voice
same basic set-up information will almost always be applied.
(If not, contact your computer manufacturer or Samsung Dealer.)			over background music or sound effects so that dialog can
1.	Click on “Control Panel” on the Windows start menu.		be heard more clearly when viewing a show.
2.	Click on “Appearance and Themes” in the “Control		Audio Language
	Panel” window and a display dialog-box will appear.
3.	Click on “Display” and a display dialog box will appear.		(digital channels only)
4.	Navigate to the “Settings” tab on the display dialog-box.		Change the default value for audio languages.
yy	The correct size setting (resolution) [Optimum: 1920 X		✎✎The available language may differ depending on the
	1080 pixels]		broadcast.
yy	If a vertical-frequency option exists on your display
	settings dialog box, the correct value is “60” or “60 Hz”.		Audio Format (MPEG / Dolby Digital 5.1)
	Otherwise, just click “OK” and exit the dialog box.
			(digital channels only)
	Sound Menu
			When sound is emitted from both the main speaker and the
			audio receiver, a sound echo may occur due to the decoding
¦¦ Changing the Preset Sound Mode			speed difference between the main speaker and the audio
			receiver. In this case, use the TV Speaker function.
			✎✎Audio Format option may differ depending on the
SRS TheaterSound t			broadcast. 5.1ch Dolby digital sound is only available
			when connecting an external speaker through an
■■	Standard: Selects the normal sound	S.MODE	optical cable.
	mode.
■■	Music: Emphasizes music over voices.
■■	Movie: Provides the best sound for movies.
■■	Clear Voice: Emphasizes voices over
	other sounds.
■■	Amplify: Increase the intensity of high-frequency sound
	to allow a better listening experience for the hearing
	impaired.

16 English