25
English
04 Advanced Features
Connecting Wireless Network ¦
To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter
(WIS09ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration below.
Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.
com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung
recommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.
NOTE
✎
You must use the “Samsung Wireless LAN A dapter” (WIS09ABGN) to use a wire less network.
x
Samsung’s Wireless LAN adapter is sol d separately. The WIS09ABGN Wirele ss LAN adapter is offered by se lect
x
retailers, Ecommerce sites and Sa msungparts.com.
To use a wireless network, your TV must be c onnected to a wireless IP sharer. If the wire less IP sharer supports
x
DHCP, your TV can use a DHCP or static IP address to conn ect to the wireless network.
Select a channel for the wireles s IP sharer that is not currently be ing used. If the channel set for the w ireless IP sharer
x
is currently being used by another de vice nearby, this will result in inter ference and communicatio n failure.
If you apply a security system other tha n the systems listed blow, it will not work with th e TV.
x
When connecting Samsung Wire less Lan Adapter to TV in 802.11N mode, WEP/TKIP/TKIP-AES (WPA2Mixed) is not
x
supported.
If your AP supports WPS (Wi-Fi Protec ted Setup), you can connect to the network v ia PBC (Push Button
x
Configuration) or PIN (Personal Ide ntification Number). WPS will au tomatically configure the SSI D and WPA key in
either mode.
If the device is not certified, it may n ot connect to the TV via the “Sam sung Wireless LAN Adapter.”
x
Connection Methods
x
: You can setup the wireless network conne ction on six ways.
Samsung Auto Configuration –
PBC (WPS) –
Auto Setup (Using the Auto Network Search function) –
Manual Setup –
SWL (Samsung Wireless Link) –
Ad-Hoc –
All of Samsung Wireless LAN Ad apter shoud be connected direc tly to the TV's USB port. USB HUB are not
x
supported.
To use the SWL(Samsung Wireless Link) func tion, connect to the
✎
USB 1 (HDD) port.
or
The LAN Port on
the Wall
LAN Cable
Wireless IP sharer
Samsung Wireless
LAN Adapter
TV Side Panel
BN68-02689A_Eng.indb 25 2010-03-07 �� 5:37:09