12
English
Basic Features
Channel Menu
¦Retuning channels
Antenna (Air / Cable)t
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Country The PIN input screen appears. Enter your 4 digit PIN number.
Digital Channel ■: Change the country for digital
channels.
Analogue Channel ■: Change the country for analogue
channels.
Auto Store
Scans for a channel automatically and stores in the TV.
Automatically allocated programme numbers may not
✎
correspond to actual or desired programme numbers. If
a channel is locked using the Child Lock function, the
PIN input window appears.
Antenna Source (Air / Cable) ■: Select the antenna
source to memorise.
Channel Source (Digital & Analogue / Digital / ■
Analogue): Select the channel source to memorise.
When selecting Cable → Digital & Analogue or Digital:
Provide a value to scan for cable channels.
Search Mode (Full / Network / Quick): Scans for all
channels with active broadcast stations and stores them
in the TV.
If you set
✎
Quick, you can set up Network,
Network ID, Frequency, Modulatio n, Symbol
Rate manually by press the button on the re mote
control.
Network (Auto / Manual): Selects the Network ID
setting mode among Auto or Manual.
Network ID: When Network is Manual, you can set up
Network ID using the numeric buttons.
Frequency: Displays the frequency for the channel.
(differs in each country)
Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.
Manual Store
Scans for a channel manually and stores in the TV.
If a channel is locked using the
✎
Child Lock function,
the PIN input window appears.
Digital Channel ■: Wh en scanning has finishe d, channels
are updated in the channel list.
When selecting
✎
Antenna → Air: Channel, Frequency,
Bandwidth.
When selecting
✎
Antenna → Cable: Frequency,
Modulation, Symbol Rate.
Analogue Channel (Programme, Colour System, ■
Sound System, Channel, Search, Store): If there
is abnormal sound or no sound, rese lect the sound
standard required.
Channel mode
✎
P
x (programme mode): When tuning is com plete,
the broadcasting stations in your area h ave been
assigned to position numbers fro m P0 to P99. You
can select a channel by entering th e position number
in this mode.
C
x (aerial channel mode) / S (cable chan nel mode):
These two modes allow you to select a c hannel
by entering the assigned number for e ach aerial
broadcasting station or cable cha nnel.
¦Editing channels
Channel Manager Option Menu
(in Channel Manager)
1. Select a channel and press the TOOLS button.
2. Edit the channel name or number using the Edit
Channel Name or Edit Channel Number menu.
Edit Channel Name ■ (analogue channels only): Assign
your own channel name.
Edit Channel Number ■ (digital channels only): Edit the
number by pressing the number buttons desired.
Other Features ¦
Cable Search Option(depending on the country)
Sets additional search options such as the frequency and
symbol rate for a cable network search.
Freq.Start / Freq.Stop ■: Set the start or stop frequency
(differs in each country)
Modulation ■: Displays available modulation values.
Symbol Rate ■: Displays available symbol rates.
BN68-02558K-Eng.indb 12 2010-04-08 �� 7:25:36