English-10
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been automatically stored.
Give easily remembered numbers to the channels that you watch most often.
1. Press the MENU button to display the menu. Press the or button
to select "Channel", then press the ENTER button.
2. Press the or button to select "Sort", then press the ENTER button.
3. Select the channel number that you wish to change by pressing the
or button repeatedly. Press the ENTER button.
The selected channel number and name are moved to right side.
4. Press the or button to move to the position in which you would like to change and
then press the ENTER button.
The selected channel is exchanged with the one previously stored to the chosen number.
5. Repeat steps 3 to 4 for another channel to be sorted.
6. Press the EXIT button to exit.
Sorting the Stored Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1. Use the number buttons to directly select the channel that you want to fine tune.
2. Press the MENU button to display the menu.
Press the or button to select "Channel", then press the ENTER button.
3. Press the or button to select "Fine Tune", then press the ENTER button.
4. Press the or button to adjust the fine tuning.
Press the ENTER button.
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk "*" on the
right-hand side of the channel number in the channel banner. And the channel number turns red.
To reset the fine-tuning, select "Reset" by pressing the or button and then press the
ENTER button.
Fine Tuning Channel Reception
Channel names will be assigned automatically when channel information is broadcast.
These names can be changed, allowing you to assign new names.
1. Press the MENU button to display the menu. Press the or button
to select "Channel", then press the ENTER button.
2. Press the or button to select "Name", then press the ENTER button.
3. If necessary, select the channel to be assigned to a new name by
pressing the or button. Press the ENTER button.
The selection bar is displayed around the name box.
4.
The characters available are :
Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
Assigning Channels Names
To...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
Then...
Press the
or
button
Press the
button
Press the
button
Press the ENTER button
BN68-01007Y-00Eng.indd 10BN68-01007Y-00Eng.indd 10 2006-08-09 3:59:322006-08-09 3:59:32