Samsung LE46N7 manual Resetting the Sound Settings to the Factory Defaults, Connecting Headphones

Resetting the Sound Settings to the Factory Defaults

If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.

1.	Press the MENU button to display the menu. Press the or button to
	select “Sound”, then press the ENTER button.
2.	Press the or button to select “Reset”, then press the ENTER button.

3.Press the EXIT button to exit.

You can select this option when the “Game Mode” is set to “On”.

Connecting Headphones

You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.

When you insert the head set jack into the corresponding port,

you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu. (Refer to “Selecting the Internal Mute” on page 18)

Prolonged use of headphones at a high volume may damage your hearing.

You will not receive sound from the speakers when you connect headphones to the system.

Selecting the Sound Mode

You can set the sound mode by pressing the “DUAL” button.

When you press it, the current sound mode is displayed on the screen.

		Audio Type		DUAL 1/2	Default
You can also set these options	FM	Mono		MONO	Automatic
		Stereo	STEREO ↔ MONO		change
simply by pressing the DUAL	Stereo
		Dual	DUAL 1 ↔ DUAL 2		DUAL 1
button on remote control.
		Mono		MONO	Automatic
	NICAM	Stereo	MONO ↔ STEREO		change
	Stereo
		Dual	MONO ↔ DUAL 1		DUAL 1
				DUAL 2

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers.

1.	Press the MENU button to display the menu. Press the or button to
	select “Setup”, then press the ENTER button.
2.	Press the or button to select “Time”, then press the ENTER button.

3.Press the ENTER button to select “Clock Set”.

4.	To...	Press the...
	Move to “Hour” or “Minute”	or	button.
	Set the “Hour” or “Minute”	or	button.
	Press the ENTER button.

5.Press the EXIT button to exit.

If you disconnect the power cord, you have to set the clock again.

You can also set hour and minute by pressing the number buttons on the remote control.

English-19