Samsung LE40N7 Resetting the Picture Settings to the Factory Defaults, Changing the Picture Size

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.

1.	To select the desired picture effect, follow the
	“Changing the Picture Standard” instructions number 1 to 3 on page 12.
2.	Press the or button to select “Reset”, then press the ENTER button.
3.	Press the EXIT button to exit.

The “Reset” will be set for each picture mode.

Changing the Picture Size

You can select the picture size which best corresponds to your viewing requirements.

1.	Press the MENU button to display the menu. Press the or button to
	select “Picture”, then press the ENTER button.
2.	Press the or button to select “Size”, then press the ENTER button.
3.	Select the required option by pressing the or button.
	Press the ENTER button.
4.	Press the EXIT button to exit.

You can select these options by simply pressing the P.SIZE button on the remote control.

ŒAuto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.

Œ16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

ŒWIDE 4:3 : Magnify the size of the picture more than 4:3.

ŒZoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

Œ4:3: This is the default setting for a video movie or normal broadcasting.

“Auto Wide” function is available only in "TV", "Ext1", "Ext2", "AV", and "S-Video" mode.

In PC Mode, only “16:9” and “4:3” mode can be adjusted.
Zoom : Select	by pressing the or buttons. Use the		or	button to move the
picture up and down. After selecting		, use the	or	button to magnify or
reduce the picture size in the vertical direction.
WIDE 4:3 : Move the screen up/down using the		or button after selecting the
by pressing the or ENTER button.

Changing the Auto Wide (4:3)

Adjusts the display picture size to 4:3 appropriate for input signal

1. Press the MENU button to display the menu. Press the or button to select “Picture”, then press the ENTER button.

2.	Press the or button to select “Auto Wide (4:3)”, then press the
	ENTER button.
3.	Select the required option by pressing the or button.
	Press the ENTER button.

4.Press the EXIT button to exit.

These functions don’t work in "Component", "PC", "HDMI1", and "HDMI2" mode.

Œ16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

ŒWIDE 4:3 : Magnify the size of the picture more than 4:3.

ŒZoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

Œ4:3: This is the default setting for a video movie or normal broadcasting.

English-14