Samsung LE46S8 manual Updating the Channel List Automatically, Updating the Channel List Manually

Updating the Channel List Automatically

You can update the channel list when the broadcaster
		Mode	: Custom		
		Equalizer	Auto Store		
adds new Services or if you move the TV to a new
		SRS TS XT	: Off		
location.		Auto Volume	: Off		
		Scanning for digital services...			
1.	Press the D.MENU button to display the DTV menu.	Internal Mute	: Off
		Reset		35%
2.	Press the ▲ or ▼ button to select "Channel", then press	Services found: 24 Channel: 38
	the ENTER/OK button.
		Move	Stop	Return
3.	Press the ENTER/OK button again, to select "Auto Store".
		Return
	Press the ENTER/OK button.
4.
	When it has finished, the number of scanned services will
	be displayed.

The existing favourite channel list will not be deleted when the channel list is updated.

To stop the scan before it has finished, press the ENTER/OK button with "STOP" selected.

5.Press the EXIT button to exit.

If the signal status is poor, the "No Service found! Check the aerial connection" message is displayed.

Updating the Channel List Manually

You can specify the channel for a fast channel search.
					Manual Store
1.	Press the D.MENU button to display the DTV menu.	Channel			Frequency	Bandwidth
2.	Press the ▲ or ▼ button to select "Channel", then press		▲
			65		474000 KHz	8 MHz
	the ENTER/OK button.
3.			▼
	Press the ▲ or ▼ button to select "Manual Store", then
	press the ENTER/OK button.			Search
4.	Press the ▲ or ▼ button to select "Channel", then press
			Adjust Return
	the ENTER/OK button.
	• Channel: Channel "5" to "69" in sequence are displayed (depending on the country)

•Frequency: The frequency available in the Channel group is displayed.

•Bandwidth: The available bandwidths are 7 and 8 MHz.

5.When it has finished, the number of scanned services will be displayed.

6.Press the EXIT button to exit.

English - 33