Samsung LE46S8, LE37S8 manual Setting the PC, Coarse and Fine Tuning of the Image Image Lock, again

Setting the PC

Coarse and Fine Tuning of the Image (Image Lock):	TV	Mode		: Custom		
The purpose of picture quality adjustment is to remove or		Equalizer	Image Lock			
reduce picture noise.		CoarseSRS TS XT		: Off		50
If the noise is not removed by Fine-tuning alone, then adjust		FineAuto Volume		: Off		0
		Internal Mute		: Off		
the frequency as best as possible (coarse) and Fine-tune		Reset
again.
After the noise has been reduced, re-adjust the picture so that
it is aligned on the center of screen.		Move		Enter	Return
1. Preset: Press the SOURCE button to select PC mode.
		Move		Enter		Return
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.

3.Press the ▲ or ▼ button to select "PC", then press the ENTER/OK button.

4.Press the ENTER/OK button to select "Image Lock".

5.Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER/OK button.

6.Press the ◄ or ► button to adjust the screen quality. Press the ENTER/OK button.

7.Press the EXIT button to exit.

Changing the Image Position:

Adjust the PC’s screen positioning if it does not fit the TV screen.

1.Follow the "Coarse and Fine Tuning of the Image

(Image Lock)"

instructions number 1 to 3.

2.Press the ▲ or ▼ button to select "Position", then press the

ENTER/OK button.

3.Press the ▲ or ▼ button to adjusting the Vertical-Position.

Press the ◄ or ► button to adjust the Horizontal-Position. Press the ENTER/OK button.

4.Press the EXIT button to exit.

Adjusting the PC Screen Automatically (Auto Adjustment): Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically.

1.Follow the "Coarse and Fine Tuning of the Image

(Image Lock)" instructions number 1 to 3.

2.Press the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER/OK button.

3.Press the EXIT button to exit.

Initializing the Image Settings (Image Reset):

You can replace all image settings with the factory default values.

1.Follow the "Coarse and Fine Tuning of the Image

(Image Lock)" instructions number 1 to 3.

2.Press the ▲ or ▼ button to select "Image Reset", then press the ENTER/OK button.

3.Press the EXIT button to exit.

TV	Position
Move	Enter	Return

TV	PC
Image Lock		
Position		
Auto Adjustment		
Image Reset		
Move	Enter	Return
TV	PC

Image Lock		
Position		
Auto Adjustment		
Image Reset		
Move	Enter	Return

English - 53