Samsung LE40S8 Connecting an Aerial or Cable Television Network, Connecting External A/V Devices

4Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

-An outdoor aerial / A cable television network / A satellite network

5Connecting CI (Common Interface) CARD

-When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.

-The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

-When the channel information configuration has finished, the message "Updating Completed" is

displayed, indicating that the channel list is now updated.

You must obtain a CI CARD from a local cable service provider.

Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it.

Insert the CI-Card in the direction marked on it.

7Connecting External A/V Devices

-Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

-Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre sponding audio out connectors on the A/V device.

-Headphone may be connected to the headphone output (6) on the rear of your set. While the head phone is connected, the sound from the built-in speakers will be disabled.

8Connecting Computer

-Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to the Video Card of your computer.

-Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other end to "Audio Out" of the sound card on your computer.

9DIGITAL AUDIO OUT (OPTICAL)

-Connect to a Digital Audio Component.

0SERVICE

- Service connection for qualified service engineer.

!Connecting Component Devices (DTV/DVD)

-Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.

-If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your set.

-The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,

B-Y and R-Y or Y, Cb and Cr.

-Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.

-This LCD TV displays its optimum picture resolution in 720p mode.

-This LCD TV displays its maximum picture resolution in 1080i mode.

@Kensington Lock

-The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

-If you want to use a locking device, contact the dealer where you purchased the TV.

-The place of the Kensington Lock may be different depending on its model.

English -