Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may dif- fer from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use.
1.Insert the locking device into the Kensington slot on the
LCD TV (Figure 1), and turn it in the locking direction
(Figure 2).
2.Connect the Kensington lock cable.
3.Fix the Kensington lock to a desk or a heavy stationary object.
Cable
Figure 2
Figure 1
<Optional>
The place of the Kensington Lock may be different depending on its model.
Troubleshooting: Before Contacting Service Personnel
No sound or picture | Check that the mains lead has been connected to a wall socket. |
| Check that you have pressed the POWER buttons on the front of the set. |
| Check the picture contrast and brightness settings. |
| Check the volume. |
Normal picture but no | Check the volume. |
sound | Check whether the MUTE button has been pressed on the remote control. |
Check if "Internal Mute" is off
No picture or black and | Adjust the colour settings. |
white picture | Check that the broadcast system selected is correct. |
Sound and picture | Try to identify the electrical appliance that is affecting the set and move it |
interference | further away. |
| Plug your set into a different mains socket. |
|
|
Blurred or snowy picture, | Check the direction, location and connections of your aerial. |
distorted sound | This interference is often due to the use of an indoor aerial. |
Remote control malfunctions Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
"Check signal cable." Check that the signal cable is firmly connected to the PC or video sources.
message is displayed. Check that the PC or video sources are turned on.
On PC mode, "Not Supported Check the maximum resolution and the frequency of the video adaptor. Mode." message is displayed. Compare these values with the data in the Display Modes.
The TFT LCD panel uses a panel consisting of sub pixels (3,133,440) which require sophisticated tech- nology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
English - 55
