Samsung LE70F9, LE52F9 manual PC in PC/AUDIO

Supported modes for HDMI/DVI and Component

	480i	480p	576i	576p	720p	1080i	1080p
HDMI/DVI 50Hz	X	X	X	O	O	O	O
HDMI/DVI 60Hz	X	O	X	X	O	O	O
Component	O	O	O	O	O	O	X

4ANT IN

To view television channels correctly, a signal must be received by the set from one of the following sources:

-An outdoor aerial / A cable television network / A satellite network

5COMMON INTERFACE Slot

-When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.

-The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

-When the channel information configuration has finished, the message "Updating Completed" is displayed, indicating that the channel list is now updated.

You must obtain a CI CARD from a local cable service provider.

Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it.

Insert the CI-Card in the direction marked on it.

6WISELINK

-Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3)

7Headphones jack

-Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled.

8S-VIDEO or VIDEO / R-AUDIO-L

-Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

-Connect RCA audio cables to "R - AUDIO - L" on your set and the other ends to corre sponding audio out connectors on the A/V device.

9PC IN (PC)/(AUDIO)

-Connect to the video and audio output jack on your PC.

0DIGITAL AUDIO OUT (OPTICAL)

- Connect to a Digital Audio Component.

!SERVICE

-Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your remote control.

The model LE70F9 cannot be wall mounted. The EX-LINK jack on this model functions as a service jack.

@COMPONENT IN

-Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.

-If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your set.

-The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled

Y, B-Y and R-Y or Y, Cb and Cr.

-Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.

-This LCD TV displays its optimum picture resolution in 1080p mode.

-This LCD TV displays its maximum picture resolution in 1080p mode.

#Kensington Lock (depending on the model)

-The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

-If you want to use a locking device, contact the dealer where you purchased the TV.

-The place of the Kensington Lock may be different depending on its model.

English -