Wall-Mount Adjustment (Sold separately) (LE52F9)

Once the wall mount is installed, the position of your TV can be easily adjustable.

 

 

 

TV Rear Panel

 

 

 

 

 

 

Auto Wall-Mount

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SERVICE Cable (Not supplied)

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Setup”, then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select “Wall-Mount Adjustment”, then press the ENTER/OK button.

3.Adjust to the desired position using the ▲,▼,◄,► buttons.

4.Press the EXIT button to exit.

If you press an arrow button when no OSD is displayed on the TV screen, the Adjustment screen appears.

When you turn the power off, your TV moves to the initial installation position.

When you turn the power on, your TV moves to the last remembered position you adjusted.

The auto wall mount will not work when Anynet+ is operating.

Using the Remote Control Buttons

TV

Setup

 

More

 

 

Wall-Mount Adjustment

 

Energy Saving

: Off

HDMI Black Level: Low

Feature Demo

: Off

PIP

 

SW Upgrade

 

Move

Enter

Return

Wall Mount Adjusment

Position1

Position

1

2

3

Adjust

INFO

Center

Exit

 

 

 

Button

 

 

 

Operations

 

 

 

 

 

 

 

 

 

 

Wall-mount angle

Tilt Up, Tilt Down, Move right, Move left

 

 

 

 

 

 

 

 

adjustment

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reset

Moves to the initial installation position

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remembering the

1.

Select the Direction buttons of the remote control.

 

 

 

 

 

 

 

 

position and

2.

Press the red button (Select Position 1).

 

 

 

 

 

 

 

 

moving to the

3.

Adjust the set to a desired position following the wall mount owner's

 

 

 

green

 

 

 

 

 

button

 

 

 

remembered

 

manual.

red

yellow

4.

button

 

 

button

position

The position you adjusted last is memorized as Position 1.

 

 

5.

By using the green button (Select Position 2) and the yellow button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Select Position 3), you can save positions according to the

 

 

 

 

 

 

 

 

 

 

procedures above.

 

 

 

 

 

 

 

 

 

6.

You can save 3 respective positions. To the red button (Select

 

 

 

 

 

 

 

 

 

 

Position 1), green button (Select Position 2) and yellow button

 

 

 

 

 

 

 

 

 

 

(Select Position 3). If you press a button after saving, the set

 

 

 

 

 

 

 

 

 

 

automatically moves to that saved angle.

 

 

 

 

 

 

 

 

 

7.

If you additionally move the set from a saved position, the last

 

 

 

 

 

 

 

 

 

 

position is saved.

For installation, refer to the Installation Manual provided.

For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation company.

This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials, please contact your nearest dealer

English - 61

Page 63
Image 63
Samsung LE70F9 manual Wall-Mount Adjustment Sold separately LE52F9, Using the Remote Control Buttons