Samsung PM55H System ▼, 2nd, 3rd, DVI, DVI, HDMI, HDMI, Description, DisplayPort, DisplayPort, Power Control, Auto Power On, Message to On, Primary Source, Primary Source

Chapter 5. Menu

System ▼

66

2nd	3rd	Description
	Auto Source Switching	When the Auto Source Switching is On, the display video source will automatically be searched for active video.
		The Primary Source selection will be activated, if the current video source is not recognized.
		The Secondary Source selection will become active, if no primary video source is available.
		If both the primary and secondary input sources are not recognized, the display will perform two searches for an
		active source, each search checking the primary and then secondary source. If both searches fail, the display will
		return to the first video source and display a message indicating that there is no signal.
		When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence
		looking for an active video source, returning back to the first video source in the sequence if no video is found.
	Primary Source Recovery	Select whether to restore the selected primary input source when a primary input source is connected.
		• The Primary Source Recovery function is disabled if Primary Source is set to All.
	Primary Source	Specify Primary Source for the automatic input source.
	Secondary Source	Specify Secondary Source for the automatic input source.
DVI Connection		Select the source device that is connected to the DVI input.
		• Restart the source device if the screen is not displayed.
Power Control	Auto Power On	This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
	PC module power	The PC module can be turned on/off separately from the LFD.
	Max. Power Saving	Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
		• Available only DVI, HDMI, DisplayPort mode.
	Standby Control	You can set the screen standby mode to be applied when an input signal is received.
		• Available only DVI, HDMI, DisplayPort mode.
		• Ensure that the source device is connected correctly when the Signal is weak or no signal message appears.
		• If No Signal Message is set to Off, the Signal is weak or no signal message does not appear. Set No Signal
		Message to On.
	Network Standby	This feature keeps the network power on when the product turns off.