Chapter 5. Menu
System ▼
67
2nd | 3rd | Description |
|
|
|
| Power Button | The power button (on the top left corner of the remote control) can be set to either turn on the power or turn on/off |
|
| the power. |
| Eco Solution | Energy Saving Mode | Reduce the power consumption by adjusting the screen brightness. |
| Eco Sensor | To enhance your power savings, the picture settings will automatically adapt to the light in the room. |
|
| • Adjusting the Backlight setting in the Picture menu disables the Eco Sensor. |
|
| • If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the |
|
| surrounding light intensity. |
| Screen Lamp Schedule | Adjust the panel brightness. A value closer to 100 makes the panel brighter. |
| No Signal Power Off | Save power by turning the device off when no signal is received from any source. |
|
| • Disabled when an attached PC is in power saving mode. |
|
| • The product will automatically power off at a specified time. The time can be changed as required. |
| Auto Power Off | The product will automatically turn off if you don’t press a button on the remote or touch a button on product front |
|
| panel within select hours to prevent overheating. |
| Temperature Control |
| This function detects the internal temperature of the product. You can specify the temperature range that is |
|
| acceptable. |
|
| The default temperature is set to 77 °C. |
|
| The recommended operating temperature for this product is 75 °C to 80 °C (based on an ambient temperature of |
|
| 40 °C). |
|
| • The screen will become darker if the current temperature exceeds the specified temperature limit. If the |
|
| temperature continues to rise, the product will power off to prevent overheating. |
| Input Device Manager |
| Set the language, type and input language shortcut for a connected keyboard. |
| Play via |
| Select the appropriate Play via mode depending on the environment where you are using the product. |
|
| The home screen may be different depending on the setting. |