8System
8.1Multi Control
O MENU m 
System 
Multi Control 
ENTER 
Assign an individual ID to your product.
8.1.1 Configuring settings for Multi Control
zMDC Connection
Select a method to connect to MDC to receive the MDC signal.
RS232C MDC
Communicate with MDC via the
RJ45 MDC
Communicate with MDC via the RJ45 cable.
zID Setup
Assign an ID to a set. (Range: 0~99)
Press | or | to select a number, and press [ ]. |
zID Input
Enter the ID number of the product connected to the input cable for input signal reception. Enter the number you want using the number buttons on the remote control.
Refer to page 71 for details about the MDC menu.
8 System 143
