Use WPS

How to set up using Use WPS

If your router has a Use WPS button, follow these steps.

1Set Network Type to Wireless from the Open Network Settings page.

2Select Use WPS, press E, and then press Eagain.

3Press the WPS or PBC button on your wireless router withine the next two minutes. Your product automatically acquires all the network setting values it needs and connects to your network.

––If you want to use the WPS PIN, select WPS PIN.

Go to your wireless router's Settings, enter your PIN, and then select OK.

4The network connection screen appears, and network setup is done.

Server Network Settings

MENU m→ Network → Server Network Settings → ENTER E

Proxy server

Set up your proxy server connection and related functions.

Off / On•• Address / Port / ID / Password

"" Address / Port / ID and Password are enabled only when Proxy server is set to On.

Device Name

MENU m→ Network → Device Name → ENTER E

Select or enter a device name.

This name can be shown on network remote controls over the network.

•• [Signage] Display1 ~ 6 / User Input

66