Manual Network Setup (Wireless)

Offices may use static IP addresses.

If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server address. Enter these values manually.

Getting the Network Connection Values

To view the Network connection values on most Windows computers, follow these steps.

1Right click the Network icon on the bottom right of the screen.

2In the pop-up menu that appears, click Status.

3On the dialog that appears, click the Support tab.

4On the Support Tab, click the Details button. The Network connection values are displayed.

How to set up manually

1Set Network Type to Wireless from the Open Network Settings page.

2The Network function searches for available wireless networks. When done, it displays a list of the available networks.

3In the list of networks, press the uor dbutton to select a network, and then press the E button twice.

"" If the desired wireless router does not appear, select Refresh to search again.

"" If the router cannot be found after retrying, select the Stop button. The Add Network button appears.

4If the Enter the password for (AP Name). screen appears, go to step 5. If you select a wireless router that does not have security, go to step 7.

5If the router has security, enter the Enter the password for (AP Name). (Security key or PIN).

6When done, use the right arrow button to move the cursor to Done, and then press E. The network connection screen appears and the verification process starts.

7Select Cancel while network connections are being attempted. This will stop the connection.

8Select IP Settings on network connection screen. The IP Settings screen appears.

9Select the field at the top, press E, and then set IP setting to Enter manually. Repeat the entry process for each field in the IP Address.

"" Setting IP setting to Enter manually automatically changes DNS setting to Enter manually.

10When done, select OK at the bottom of the page, and then press E. The network test screen appears and the verification process starts.

11When the connection has been verified, the “Success! Your device is connected to the

Internet. If you have any problems using online services, please contact your Internet service provider.” message appears.

65