Specifications

VESA Mounting Interface

700DX-3 800.0 mm x 400.0 mm

820DX-3 1400.0 mm x 800.0 mm

Environmental considerations

Operating

Temperature : 32°F ~ 104°F (0°C ~ 40°C)

 

Humidity : 10 % ~ 80 %, non-condensing

 

 

Storage

Temperature : -4°F ~ 113°F (-20°C ~ 45°C)

 

Humidity : 5 % ~ 95 %, non-condensing

Plug and Play Capability

This LCD Display can be installed on any Plug & Play compatible system. The interaction of the LCD Display and the computer systems will provide the best operating conditions and LCD Display settings. In most cases, the LCD Display installation will proceed automatically, unless the user wishes to select alternate settings.

Dot Acceptable

TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.

For example, the number of TFT-LCD sub pixels contained in this product are 6,220,800.

Note

•Design and specifications are subject to change without prior notice.

•Attaching a Samsung ID (videowall kit) will increase the weight of an LFD by 1.6 kg.

Note

This device is a Class A digital apparatus.

(USA Only)

Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website, www.sam- sung.com/recyclingdirect, or call (877) 278 - 0799

PowerSaver

This LCD Display has a built-in power management system called PowerSaver. This system saves energy by switching your LCD Display to low-power mode when it has not been used for a certain amount of time. The LCD Display automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your LCD Display OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your computer. Use the software utility installed on your computer to set up this feature.