Introduction

•Do not use screws that do not comply with the VESA standard screw specifications.

•Do not use screws that are longer than the stand- ard length or do not comply with the VESA stand- ard screw specifications. Screws that are too long may cause damage to the inside of the prod- uct.

•For wall mounts that do not comply with the VE- SA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.

•Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.

•Samsung is not liable for product damage or per- sonal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

•Do not mount the product at more than a 15 de- gree tilt.

•Always have two people mount the product on a wall.

Model name

VESA screw hole specs (A

Standard Screw

Quantity

 

* B) in millimeters

 

 

700DX-3

800 mm X 400 mm

M8

4

 

 

 

 

820DX-3

1400 mm X 800 mm

M8

4

 

 

 

 

Warning / Caution

Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.

Remote Control (RS232C)

Cable connections

interface

RS232C(9 pin)

 

 

pin

TxD(No.2) RxD(No.3) GND(No.5)

 

 

Bits rate

9600 bps

 

 

Data Bits

8 bit

 

 

Parity

None

 

 

Stop Bits

1 bit

 

 

Flow control

None

 

 

Maximum length

15 m (only shielded type)

 

 

•Pin assignment