Adjusting the LCD Display

Color Temp. is a measure of the 'warmth' of the image colors.

Note

•Not available when Dynamic Contrast is set to On.

•This function is only enabled if the Color Tone is set to Off.

Image Lock

Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and shakiness. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again.

Note

Available in PC mode only.

Coarse

Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu.

Fine

Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).

Position

Adjusts the screen location horizontally and vertically.

Auto Adjustment

The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed.

Note

Available in PC mode only.

Signal Balance

This is used to make up for the weak RGB signal transmitted by a long signal cable.