Adjusting the LCD Display
•MDC ConnectionSelects a port to receive the MDC inputs from.
•Communicates with the MDC via a RS232C MDC cable.
•Communicates with the MDC via an RJ45 MDC cable.
•Network Setting•IP Setting : Manual, Auto•IP Address : Manually enter the IP Address if IP Setting is set to Manual.•Subnet Mask : Manually enter the Subnet Mask if IP Setting is set to Manual.•Gateway : Manually enter the Gateway if IP Setting is set to Manual.
MagicInfo
Available Modes
• PC / DVI / DisplayPort
• AV
• Component
• HDMI
• MagicInfo
• TV
Note
A TV tuner box (sold separately) must be connected to use the TV. (US Only)
MagicInfo can only be enabled when a network box(sold separately) is connected.
Note
•The remote control can be used to select MagicInfo. However, it is recommended to use a separate USB keyboard to utilize MagicInfo fully.
•For MagicInfo in Device mode, moving external devices while booting may cause errors. Set up external devices only if the LCD Display turns on.
•Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the Program (MagicInfo) may stop. If you do unplug the cable, restart the system.
•Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the Program (MagicInfo) may stop.
•To access other sources, press the SOURCE button in MagicInfo.
•The preset password for the LCD Display is "000000".
•The server Program's