Samsung LN22A330, LN22A0J1D, Series L3 user manual Connecting a VCR, Video Connection

Connecting a VCR

Video Connection

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6~7). Skip step 1 if you have not yet connected to an antenna or a cable system.

1.Unplug the cable or antenna from the back of the TV.

2.Connect the cable or antenna to the ANT IN terminal on the back of the VCR.

3.Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.

4.Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN [VIDEO] jack on the TV.

5.Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN [R-AUDIO-L] jacks on the TV.

If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCRis stereo, you must connect two cables.

S-Video Connection

ANT IN

TV Rear Panel

VCR Rear Panel

5 Audio Cable (Not supplied)

4Video Cable (Not supplied)

3RF Cable (Not supplied)

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

Each VCR has a different back panel configuration.

When connecting a VCR, match the color of the connection terminal to the cable.

Your Samsung TV can be connected to an S-Video jack on a VCR.

(This connection delivers a better picture when compared to the regular Video connection above.)

1.To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV.

2.Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN [S-VIDEO] jack on the TV.

3.Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN [R-AUDIO-L] jacks on the TV.

TV Rear Panel

VCR Rear Panel

3 Audio Cable (Not supplied)

2S-Video Cable (Not supplied)

1RF Cable (Not supplied)

An S-Video cable may be included with a VCR. (If not, check your local electronics store.)

Each VCR has a different back panel configuration.

When connecting a VCR, match the color of the connection terminal to the cable.

English - 10