Upgrading the Software
Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at
1.Insert a USB drive containing the firmware upgrade into the SERVICE port on the rear of the TV.
➣ Software can not be upgraded through the LAN connection.
TV Rear Panel
USB Drive
2. Press the MENU button to display the menu. |
|
| TV | Setup |
|
|
| Plug & Play |
| ► | |
Press the ▲ or ▼ button to select “Setup”, then press the ENTER | button. | Language | : English | ► | |
Time |
| ► | |||
|
|
|
| ||
3. Press the ▲ or ▼ button to select “SW upgrade”, then press the ENTER | button. |
| ► | ||
Caption |
| ► | |||
|
|
| Melody | : Medium | ► |
|
|
| Energy Saving | : Off | ► |
|
|
| SW Upgrade |
| ► |
|
|
| Move | Enter | Return |
4.Press the ENTER 
button.
The message “Scanning for USB... It may take up to 30 seconds.” is displayed.
5.The message “Upgrade version XXXX to version XXXX The system would be reset after upgrade.” is displayed.
Press the ◄ or ► to select the “Yes”, then press the ENTER 
button.
Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete. When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.
USB Software Upgrade
Scanning for USB...
It may take up to 30 seconds
USB Software Upgrade
Upgrade version XXXX to version XXXX The system would be reset after upgrade.
Yes |
| No |
English - 51
