Samsung LS23EMWKF/CH, LS23EMWKF/XT manual Troubleshooting, Monitor Self-Diagnosis

5 Troubleshooting

5-1 Monitor Self-Diagnosis

•You can check if the product is working properly using the Self-Diagnosis function.

•If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform the self-diagnosis function according to the procedures below.

1.Turn the product and the PC off.

2.Remove the D-Sub cable from the product.

3.Turn the product on.

4.If the product is working properly, the <Check signal cable> message appears.

In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection.

5-1 Troubleshooting