IN S TA L L AT I O N
4
Connect a coaxial cable between the
ANTENNA OUT terminal on the cable box and the
5
Connect another cable between the other OUT terminal on the splitter and the
6
Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV.
After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels.
(When you set the A/B switch to “B,” you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
