Samsung LW-17E24C Plug and Play, Installing the Video Driver, Self-Test Feature Check Stfc

4E_body3p.fm Page 6 Wednesday, December 19, 2001 4:09 PM

Setting up Your LCD TV/Monitor

Plug and Play

The adoption of the new VESA® Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your TV/Monitor in a Plug and Play compatible system without the usual hassles and confusion. Your PC system can easily identify and configure itself for use with your display. This TV/Monitor automatically tells the PC system its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the PC system can automatically configure itself to use the LCD. If your PC system needs a video driver, follow the instructions given below according to the operating system your computer uses.

Installing the Video Driver

The CD that accompanies this product contains the necessary drivers for installing your TV/Monitor. Please refer to the driver installation instructions included with your CD package for more information.

Self-Test Feature Check (STFC)

Your TV/Monitor provides a self-test feature that allows you to check whether your TV/Monitor is functioning properly. Make sure that PC is selected as a primary source by checking if the source indicator LED labeled “PC” is on. If your TV/Monitor and computer are properly connected but the TV/Monitor screen remains dark and the power indicator is blinking, run the TV/Monitor self-test by following the steps given below:

Power Indicator

Figure 3. Power Indicator

1

2

3

Turn off both your computer and the TV/Monitor.

Unplug the video cable from the back of the computer.

Turn on the TV/Monitor.

English 6