Samsung M520 Using Call Name or #, Calling Contacts Entries, To place a call using Call Name or #

Using Call <Name or #>

You can voice dial from your phone with a single command by saying “Call” followed by a name or nickname (see “Calling Nicknames” on page 130) and (optionally) a label stored in your Contacts list; or say “Call” followed by a valid phone number. You can also say “Call” by itself and be prompted for the name or number.

Calling Contacts Entries

To place a call using Call <Name or #>:

1.Press and hold .

2.Say “Call” followed by the name and the label for the number you wish to call. For example, say “Call John Mobile.” The phone dials the number stored for the contact “John” with the label “Mobile.”

If the location recognized for the name does not have a number stored in Contacts, your phone will play the message “No number available, John Smith, Mobile,” and then launch the Contacts application for that name.

If a name has only a single number, or if you know the name but are not sure which number to call, say “Call” followed by the name only. For example, say “Call John.” If the name is recognized and there is only one number for the name, your phone immediately places the call. If there are multiple numbers stored for the contact, the phone prompts you with “Which Number?” and displays a list of options. You can select an option by saying it or by using your keypad.

Voice Services

Section 2H: Using Your Phone’s Voice Services 129