Samsung M520 manual Printing Pictures Using PictBridge, Printing From Your Phone, 165

Printing Pictures Using PictBridge

PictBridge is an industry standard established by the Camera & Imaging Products Association (CIPA) that enables a range of digital photo solutions, including direct photo printing from a digital camera to a printer without the need for a computer.

Printing From Your Phone

Your phone’s built-in camera allows you to print images directly to a printer using the PictBridge technology. A USB cable must be connected between the two devices before any printing can occur.

To use PictBridge to print pictures from your phone:

1.Insert one end of the USB accessory cable into the USB slot on the printer. (The printer must support PictBridge technology.)

2.Select Menu > Pictures > PictBridge.

3.Insert the other end of the USB accessory cable into your phone.

4.Read the Connect Printer message and select

Next (). The Select Folder pop-up appears in the display. Select the folder location of the image.

5.Highlight the desired image and select Next (). (To select

multiple images, press to place a check mark next to each image selected.)

6.Highlight Copies and press the navigation key left or right to select the desired number of copies to print.

7.Press the navigation key down to select Type. Press the navigation key left or right to select one of the following:

■Standard: prints the standard image.

■Index: prints the index information.

Note: These options may vary and are dependent on the printer’s capabilities.

Camera

Section 2I: Using the Built-in Camera 165