Searching for and Storing the Radio Stations (continued)
GB
8 If you do not want to store the radio station found, revert to Step 4 and search for another station.
Otherwise:
aPress Memory.
Result: The PRGM is displayed for a few seconds.
bPress Tuning Down and Up or turn Multi Jog to assign a pro- gramme number between 1 and 15.
cPress Memory to store the radio station.
Result: PRGM is no longer displayed and the station is stored.
9 To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station to an existing programme number.
Selecting a Stored Station
You can listen to a stored radio station as follows:
1 Switch the system on by pressing On/Standby.
2 Select the TUNER function by pressing TUNER .
3 Select the required frequency band by pressing TUNER (Band) on the remote control or TUNER (Band) again on the front panel.
4 Press 
, 
button on the front panel of the unit, or the 
, 
button on the remote control until “PRESET” is displayed.
5 Turning
station is found or press | , | to select the desired station. |
or
Select the desired station by pressing the station number stored,
using the | , | button on the remote control. |
Result: The desired station is now received.
8 |
|
| 8 |
8 | 8 |
1 |
2,3 |
4 
4
In Tuner mode
In manual tuning mode, you can use Multi Jog or 
/ 
button to manual search a radio station.
During Tuner auto searching, press 
button to stop auto searching.
In Preset tuning mode, you can use Multi Jog or 
/ 
button to search a stored radio station.
Improving Radio Reception
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing them permanently
If reception from a specific FM radio station is poor, press Mono/ST on the remote control to switch from stereo mode to mono. The quali- ty of the sound will be improved.
22
