Timer Function
The timer enables you to switch the system on or off at spe- cific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off auto- matically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
1 Switch the system on by pressing On/Standby.
2 Press Timer/Clock until TIMER is displayed.
3 Press Enter on the front panel.
Result: ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any
4 Set the timer
a Set the hour by tuning the Multi Jog knob to the right or to the left.
b Press Enter on the front panel. Result: The minutes flash.
c Set the minutes by tuning the Multi Jog knob to the right or to the left.
d Press Enter on the front panel.
Result: OFF TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any
5 Set the timer
a Set the hour by tuning the Multi Jog knob to the right or to the left.
b Press Enter on the front panel. Result: The minutes flash.
c Set the minutes by tuning the Multi Jog knob to the right or to the left.
d Press Enter on the front panel.
Result: VOL XX is displayed, where XX corresponds to the volume already set.
6 Press Tuning Down and Up to adjust the volume level and press Enter on the front panel.
Result: The source to be selected is displayed.
7 Turn the Multi Jog knob to select the source to be played when the system switches on.
If you select... | You must also... |
TAPE (cassette) | Insert a recorded cassette in one of the |
| decks before setting the system to standby. |
TUNER (radio) | a Press Enter on the front panel. |
| b Select a preset station by tuning the |
| Multi Jog knob to the right or to the left. |
| CD (compact disc) | Load one or more compact discs. | |
8 | Press Enter on the front panel to confirm the timer. | ||
9 | Press On/Standby to set the system to standby mode. | ||
| Result: | is displayed to the bottom left of the time, indicating that |
the timer has been set. The system will switch on and off automatically at the required times.
If the timer switch on and off times are identical, the word ERROR is displayed.
|
| GB |
2 |
|
|
1,9 | 4,5,7 |
|
| 6 |
|
| 6 | 3,4,5,6,7,8 |
|
|
To set the timer function
You may use Multi Jog or / buttons to adjust in step 4,5,6,7.
Cancelling the Timer
After having set the timer, it will start automatically as shown by the TIMER indication on the display. If you no longer wish to use the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To... | Press Timer On... | |
Cancel the timer | Once. |
|
| Result: | is no longer displayed. |
Restart the timer | Twice. |
|
| Result: | is displayed again. |
25