Connecting to an External Source | Safety Precautions |
GB
The auxiliary input can be used to take advantage of the sound quality of your
The following diagrams illustrate the precautions to be taken when using or moving your
| Examples: | A television |
|
|
| A video disc player |
|
|
| A DAT or DCC cassette player | |
|
| A | |
| To connect the external source, the source must have an audio | ||
| output. In addition, you need an RCA connection cable. | ||
|
| ||
1 | Set the system to standby mode and disconnect it and the external | ||
| source from the main. |
| |
2 | Connect the audio cable to the rear of the | ||
| Connect the... | To the connector marked... | |
| Red jack |
| R (right) |
| White jack |
| L (left) |
| For optimum sound quality, do not invert the right and left channels. | ||
3 | Plug the system back into the main socket and press On/Standby to | ||
| switch it on. |
|
|
4 | Select the AUX source by pressing AUX on the front panel. | ||
5 | Result: AUX is displayed. |
| |
Switch the external source on. |
| ||
6 | Adjust the volume and balance as required: | ||
| Volume | Equalizer |
|
Example: You can watch a film and take advantage of stereo sound provided that the original sound track is in stereo, (as if you were in a cinema).
Ambient operating conditions:
Ambient temperature | |
Humidity |
|
Do not place potted plants or vases on top of the unit. Moisture entering the unit could lead to dangerous electric shock and can cause equipment damage. In such events immediately disconnect the main plug from the socket.
Do not expose the unit to direct sun radiation or other heat sources. This could lead to overheating and malfunction of the unit.
During thunderstorms, disconnect the main plug from the socket. Main voltage peaks due to light- ning could damage the unit.
3 |
4 |
| VOLUME |
| UP |
| DOWN |
Remove the batteries from the | When using headphones, take care |
remote control, if not used for any | not to listen at excessive volumes. |
extended periods. | Extended use of headphones at |
Leaking batteries can cause serious | high volumes will lead to hearing |
damage to the remote control. | damage. |
Do not place heavy items on the main lead. Main cable damage can lead to damage of the equipment (fire hazard) and can cause electric shock.
Do not remove any equipment panels. The inside of the unit
contains live components, which cause electric shock.
28
