Samsung MAXDS730TH/ESN manual Listening to a Cassette, CD Synchro Record Feature

Listening to a Cassette

Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 29.

1	Switch the system on by pressing the On/Standby button.
2	Select the TAPE function by pressing TAPE.
3	Open either cassette deck 1 or 2 by pushing and releasing the deck
4	cover where Push Eject (		) is written.
	Insert the pre-recorded cassette with the open edge of the tape fac-
	ing downward.
5	Close the deck by pushing on it until it clicks into place.
	Result: Depending on the deck selected, the 1 or 2 indication is
	displayed in front of the counter number.
	If you insert a cassette in both decks, the system selects the
	deck in which you inserted the second cassette.
6	If you have inserted two cassettes, press Deck 1/2 on the front panel
	or directly the Deck 1/2 button on the remote control to select the
	cassette to be played.
	Result: Depending on the deck selected, the TAPE 1 or TAPE 2 indi-
	cation is displayed.
7
	To listen to...	Press ...
	Side A	TAPE (		)once	DECK 1 and DECK 2
	Side B	TAPE (		)twice	DECK 2 only
	Result: The cassette starts playing.
8	When the cassette is stopped, select one of the following functions
	as required.
	Main Unit
	To...				Press ...

Rewind the cassette

Fast-forward the cassette

Remote Control

To...Press ...

Rewind the cassette

Fast-forward the cassette

9 To... Press...

Stop the playback or search

1
	2,7
6
8	9	8

CD Synchro Record Feature

(This function is not available during playback of an MP3-CD.)

GB

You can record a compact disc on a cassette in two different ways:

Synchronised recording

Direct recording

This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.

1	Switch the system on by pressing On/Standby.
2	Insert a blank cassette in Deck 2.
3	Select the CD function by pressing DVD/CD on the front panel.
4	Load a compact disc.
5	Select the required disc.
6	Select the required track and press CD Synchro or press CD
	Synchro directly to start recording at the beginning of the disc.
	Result: “REC” and “CD SYNC” are displayed and recording starts.
7
	To stop...	Press ...
	Recording and playing the compact disc

1		3
	6	7

Recording a Compact Disc

The direct recording mode enables you to start recording with any track on the compact disc.

You can only record on cassettes in Deck 2.

You do not need to adjust the volume, as it has no effect on the recording.

1	Switch your system on by pressing On/Standby.
2	Insert a blank cassette in Deck 2.
3	Select the CD function by pressing DVD/CD on the front panel.
4	Load the compact disc.
5	Select the required disc.
6	Select the required track on the compact disc and press				on the front
	panel or	on the remote control to set the compact disc player to Pause
	mode.
7	Press the REC/Pause.
	Result: REC is displayed .
8	Press the		to start playing the track.
	Result: The track is recorded on the cassette.
9	When you have finished recording, press TAPE			on the remote
	control or		on the front panel to stop recording.

1	3,6,8
7	9
	23