Samsung MC28H5135CK/ZA manual Checking That Your Oven is Operating Correctly, Setting the Time

CHECKING THAT YOUR OVEN IS OPERATING

CORRECTLY

The following simple procedure enables you to check that your oven is working correctly
				4. Turn the Multi Function Selector Dial to set the hour.
at all times. If you are in doubt, refer to the section entitled “Troubleshooting” on the
page 38-39.
The oven must be plugged into an appropriate wall socket. The turntable must be
				5. Press the Multi Function Selector Dial.
in position in the oven. If a power level other than the maximum (100 % - 900 W) is
used, the water takes longer to boil.
Open the oven door by pulling the handle on the right side of the door.
Place a glass of water on the turntable. Close the door.				6. Turn the Multi Function Selector Dial to set the minute.
	Press the START/+30s button and set the time to 4 or
	5 minutes, by pressing the START/+30s button the appropriate
	number of times.			7. When the right time is displayed, press the Multi Function
	Result:	The oven heats the water for 4 or 5 minutes.
				Selector Dial to start the clock.
		The water should then be boiling.
				Result:	The time is displayed whenever you are not
SETTING THE TIME					using the microwave oven.
			COOKING/REHEATING
When power is supplied, “88:88” and then “12:00” is automatically displayed on the
display.			The following procedure explains how to cook or reheat food.
Please set the current time. The time can be displayed in either the 24-hour or 12-hour
			ALWAYS check your cooking settings before leaving the oven unattended.
notation. You must set the clock:
• When you first install your microwave oven			Open the door. Place the food in the centre of the turntable. Close the door. Never switch
• After a power failure			the microwave oven on when it is empty.
Do not forget to reset the clock when you switch to and from summer and winter
time.				1. Press the Microwave button.
				Result:	The following indications are displayed:
	1. Press the Multi Function Selector Dial.				(microwave mode)
				2. Turn the Multi Function Selector Dial until the appropriate
				power level is displayed.
	2. Turn the Multi Function Selector Dial to set time display			At that time, press the Multi Function Selector Dial to set
				the power level.
	type. (12H or 24H)
				• If don’t set the power level within 5 seconds,
				Automatically changes to the cooking time setting stage.
	3. Press the Multi Function Selector Dial to complete the
				3. Set the cooking time by turning the Multi Function
	setup.
				Selector Dial.
				Result:	The cooking time is displayed.

English - 14

MC28H5135CK_ZA_DE68-04245T-00_EN.indd 14 2014-02-26 �� 9:04:10