12 MASTERCONSOLE II USER MANUAL
Installation Install Base Unit (First-Tier) MasterConsole II
1. Plug the keyboard, monitor, and mouse into the keyboard, monitor, and mouse ports on the
MasterConsole II back panel.
Mouse Port
Monitor Port Keyboard Port
Figure 18 MasterConsole II Rear Panel
Figure 19 Two-Tier Configuration Cabling Detail
2. Power on the MasterConsole II base unit.
3. Connect computers to any Channels on the base MasterConsole II back panel.
a. Shut down and power off all computers to be connected to the base MasterConsole II.
b. Using a Universal cable kit (CCPTnn), plug the 25-pin connector into one of the
numbered Channels on the base MasterConsole II back panel.
c. Plug the cable's other connectors into the computer's keyboard, monitor, and mouse
ports. Use supplied adapters for AT style PCs.
d. Power ON the connected computer.
e. Select the connected computer by pressing the corresponding front panel button. Verify
that the monitor attached to MasterConsole II displays the video for the connected
computer. Use the keyboard and mouse attached to the base MasterConsole II to verify
that they operate the connected computer.
f. Repeat steps 3.a through 3.e to connect additional computers to the base MasterConsole
II.